Product Name: Cleaning Filament
Cleaning nozzle temperature: 210-250 ° C
Outer diameter of the reel: 195mm
Reel height: 78mm
Inner diameter of the reel: 58mm
RepRap, Makerbot, Ultimaker, Mendel, Huxley UP, WeisTek, Thing-o-matic, Ult, Taier era, flash
casting, Mai Rui and other FDM models.
How to use the cleaning filament?
This filament can be used to clean the printers print core by applying hot and cold pulls. Hot pulls
are used to get the biggest parts of carbonized material out of the print core and are highly
recommended when the print core is clogged. With a cold pull, the remaining small particles will be
removed, ensuring the print core is completely clean.
Load the cleaning filament as usual into your 3D printer until the old filament is displaced and
filament emerges from the nozzle. Adjust the extruder so that it remains hot. Use the "Preheat" or
"Control” “→Temperature" option and set the temperature to 200-230°C and let it simmer for 5
Afterwards, extrude a few centimeters of filament and let the whole stand again with a hot extruder.
Repeat the procedure again.
Now remove the 3D cladding and load the filament with which you want to print until the cleaning
filament is completely displaced.
This cleaning line is suitable for all FDM 3D printers to clean the extrusion head online, for several
1. It has certain adhesion ability to ABS, PLA, carbon, etc. It can bring out the remaining materials
remaining in the nozzle and directly remove the material residue
and carbon deposit in the printer;
2. It can be used for the transition between the two materials switching, because its melting
temperature is between 160-280 degrees, preventing the
degradation of the low temperature material when it becomes high temperature, or the residual plug
when the high temperature material becomes low
3. The printer head is regularly maintained.
A 3D printer needs care to achieve perfect results. Cleaning filament for 3D printers can not be
used as a printing material, but only as a support to clean your mind!
The cleaning filament is used for both print core maintenance and unclogging procedures.
Recommend performing regular maintenance once every three months. Unclog the print core if there
is no material extruding from the nozzle for at least ten minutes.
The cleaning filament has been developed to ensure a smooth transition between different colors
and materials. The cleaning filament contains a highly effective cleaning concentrate for plastic
processing machines. During application, it foams in the scourge and begins to dissolve the smut.
Burned dust, dirt and plastic residues are thus removed